English

España

PRODUCTS CENTER





Number of views:

1000

Belt Cleaner

Conveyor cleaner is a kind of device used to clean the conveyor. In the process of conveying materials of belt conveyor, if the residual attached materials enter into the roller or roller bearing seat, the bearing wear will be accelerated, and the materials stuck on the roller or roller surface will tear and roughen the rubber on the conveyor belt surface, which will accelerate the wear and destruction of the conveyor belt. Conveyor belt cleaners help remove bulk material product carry back and prevent it from falling off at various points of the conveyor along the return side of the belt causing various housekeeping and conveyor belt maintenance problems.

Retail price

0.0

元

Market price

0.0

元

Number of views:

1000

Product serial number

Quantity

Stock:

Category



Equipments Network

Like this product? Share with friends:

Product description

Parameters

Product Introduction:

Product Advantages:

If the cleaner works well, the service life of idler, conveyor belt and roller can be prolonged; therefore, the cleaning ability of the cleaner plays an important role in improving the operation efficiency and reliability of the belt conveyor, reducing the failure rate of the equipment and reducing the maintenance cost.

High cleaning performance.
Protect the conveyor belt.
Self cleaning effect
Fire prevention.
No potential accidents.
Small amount of maintenance.
one-piece urethane blade, better cleaning
belt width: 450-2200mm
left and right spring tensions
easy maintenance and replacement

None

Recommended

Hebei Juxin Conveyor Engineering Co., Ltd., formerly known as Zaoqiang County Mining Machinery Manufacturing Plant in Hebei Province

Long-Distance Curved Belt Conveyor

Long-distance curved belt conveyor system is a new product developed by JUXIN in the direction of integration, intelligence and high-end over the past 26 years of R&D and production. Its super long conveying distance, super large conveying capacity and the multi-point horizontal turning conveying mode can meet the needs of high-yield and efficient material handling to the greatest extent.

详细介绍 +

Tubular Conveyor

The conveyor belt is formed into a circular tube shape, and continuously conveys a variety of loose materials such as powder, granule and block in a closed environment. It is widely used in power plants, building materials, chemical industry, metallurgy, mining, coal, ports, food and other industries. Based on the continuous research and practice of the tubular conveyor, our company has summed up a set of standards and methods for system design, manufacturing, installation, commissioning and inspection,which has formed a product series.

详细介绍 +

Large Inclination Belt Conveyor

The belt conveyor with large inclination angle and side wall is generally suitable for the working environment with a inclination angle of 30°~90°, and the maximum lump size of material is 400mm. It is an ideal equipment for large inclination conveying and vertical lifting of materials. It can be widely used in industries such as metallurgy, electric power, coal, building materials, chemical industry, light industry, grain, port, shipbuilding and so on. For special materials, such as high temperature, acidic, alkaline, oily, or organic solvent-containing materials, special rubber belts with side wall are required.

详细介绍 +

Carrying Idlers

JUXIN conveyor idlers and conveyor rollers are designed to operate in the most extreme of environments, each conveyor idler set and or conveyor roller is supported by the industries lowest breakaway mass, close tolerances, duty matched shafts, effective seals and premium bearings. Due to the energy efficiency and low noise of our idlers, JUXIN idlers are typically the idler of choice for long overland and large in plant conveyor systems, for further information download our Conveyors Idler Selection Data Sheet.

详细介绍 +

Training Idlers

详细介绍 +

Return Idlers

详细介绍 +

Drive pulley

Drive pulley is the main part of the belt conveyor to transmit power. The surface of the drive pulley has bare steel surface, herringbone and diamond pattern rubber coating. The bare steel surface can be used for low power, small belt width and dry environment. The chevron rubber surface has a large friction coefficient, good slip resistance and drainage, but it has directionality. Diamond rubber surface is used for two-way conveyors. Our company has advanced automated production equipment, professional technicians, complete assembly line operation, and perfect inspection methods in the production design of the drive pulley to ensure that the drive pulley produced by our company always maintains a high reputation in the eyes of customers. During the production process of the drive pulley, we inspect each round steel to avoid quality problems from the raw materials.

详细介绍 +

Tail Pulley

Tail Pulley has the characteristics of compact structure, light weight, low occupation, reliable performance, beautiful appearance, convenient use, and can still work normally under harsh conditions such as heavy dust, damp and muddy conditions. Bend Pulley is mainly under the belt movement. If the conveying direction of the belt is left, Tail Pulley is on the right side of the belt conveyor. The main structure is the bearing and the steel Pulley . The driving pulley is the driver of the belt conveyor. The relationship between the two pulleys is like the two wheels of a bicycle. The rear wheel is the driving pulley and the front wheel is Bend Pulley. Bend Pulley and the driving pulley are structurally indistinguishable. Both are composed of the main shaft pulley bearing and the bearing housing. There are two types: main drive and driven.

详细介绍 +

Snub Pulley

Snub Pulley has the characteristics of compact structure, light weight, low occupation, reliable performance, beautiful appearance, convenient use, and can still work normally under harsh conditions such as heavy dust, damp and muddy conditions. Bend Pulley is mainly under the belt movement. If the conveying direction of the belt is left, Bend Pulley is on the right side of the belt conveyor. The main structure is the bearing and the steel Pulley . The driving pulley is the driver of the belt conveyor. The relationship between the two pulleys is like the two wheels of a bicycle. The rear wheel is the driving pulley and the front wheel is Bend Pulley. Bend Pulley and the driving pulley are structurally indistinguishable. Both are composed of the main shaft pulley bearing and the bearing housing. There are two types: main drive and driven.

详细介绍 +





SINCE 1994'

Founded in Hebei, China in 1994, Juxin has grown over the years from a specialist conveyors company to a broad based conveyor engineering company providing materials handling solutions and mechanical installation services to a wide variety of industries and applications.