English

España

PRODUCTS CENTER





Number of views:

1000

Flat Return Training Idlers

JUXIN conveyor idlers and conveyor rollers are designed to operate in the most extreme of environments, each conveyor idler set and or conveyor roller is supported by the industries lowest breakaway mass, close tolerances, duty matched shafts, effective seals and premium bearings. Due to the energy efficiency and low noise of our idlers, JUXIN idlers are typically the idler of choice for long overland and large in plant conveyor systems, for further information download our Conveyors Idler Selection Data Sheet.

Retail price

0.0

元

Market price

0.0

元

Number of views:

1000

Product serial number

Quantity

Stock:

Category



Equipments Network

Like this product? Share with friends:

Product description

Parameters

Flat Return Training Idlers provide a similar dynamic alignment method for the

carry side of the belt as the Carrying Training Idlers provides to the return side. These

positive action training frames can be custom made for any belt width to your project requirements.

For further information download our Conveyors Idler Selection Data Sheet.

JUXIN Conveyor Idler Features
•   Bearings range from 6204 – 6312
•   Bearing Brands – SKF, FAG, NSK, TIMKEN or LFD
•   Complete range of roller sizes from 89-250mm in diameter
•   Energy efficient (low breakaway mass)
•   High quality 2RS bearings
•   Low noise
•   Excellent TIR
•   Manufactured with high quality steels

JUXIN Conveyor Roller Product Range
•   Aluminium lightweight rollers
•   Composite conveyor rollers
•   HDPE sleeved steel (hybrid) conveyor rollers
•   Impact rollers (Rubber & Polyurethane)
•   Lightweight hollow-shaft rollers
•   Rubber & Polyurethane disc return rollers
•   Steel carry and return conveyor rollers

JUXIN Conveyor Idler Range
•   Belt tracker idler assemblies
•   Flat return roller/idler
•   Hollow shaft rollers/idlers – 600mm+
•   Impact idler sets ranging from 5-60 degrees trough angle
•   Steel troughing idlers ranging from 20 to 45 degrees
•   V return idlers

Return Idlers

None

Recommended

Hebei Juxin Conveyor Engineering Co., Ltd., formerly known as Zaoqiang County Mining Machinery Manufacturing Plant in Hebei Province

Long-Distance Curved Belt Conveyor

Long-distance curved belt conveyor system is a new product developed by JUXIN in the direction of integration, intelligence and high-end over the past 26 years of R&D and production. Its super long conveying distance, super large conveying capacity and the multi-point horizontal turning conveying mode can meet the needs of high-yield and efficient material handling to the greatest extent.

详细介绍 +

Tubular Conveyor

The conveyor belt is formed into a circular tube shape, and continuously conveys a variety of loose materials such as powder, granule and block in a closed environment. It is widely used in power plants, building materials, chemical industry, metallurgy, mining, coal, ports, food and other industries. Based on the continuous research and practice of the tubular conveyor, our company has summed up a set of standards and methods for system design, manufacturing, installation, commissioning and inspection,which has formed a product series.

详细介绍 +

Large Inclination Belt Conveyor

The belt conveyor with large inclination angle and side wall is generally suitable for the working environment with a inclination angle of 30°~90°, and the maximum lump size of material is 400mm. It is an ideal equipment for large inclination conveying and vertical lifting of materials. It can be widely used in industries such as metallurgy, electric power, coal, building materials, chemical industry, light industry, grain, port, shipbuilding and so on. For special materials, such as high temperature, acidic, alkaline, oily, or organic solvent-containing materials, special rubber belts with side wall are required.

Carrying Idlers

Training Idlers

Return Idlers

Drive pulley

Drive pulley is the main part of the belt conveyor to transmit power. The surface of the drive pulley has bare steel surface, herringbone and diamond pattern rubber coating. The bare steel surface can be used for low power, small belt width and dry environment. The chevron rubber surface has a large friction coefficient, good slip resistance and drainage, but it has directionality. Diamond rubber surface is used for two-way conveyors. Our company has advanced automated production equipment, professional technicians, complete assembly line operation, and perfect inspection methods in the production design of the drive pulley to ensure that the drive pulley produced by our company always maintains a high reputation in the eyes of customers. During the production process of the drive pulley, we inspect each round steel to avoid quality problems from the raw materials.

详细介绍 +

Tail Pulley

Tail Pulley has the characteristics of compact structure, light weight, low occupation, reliable performance, beautiful appearance, convenient use, and can still work normally under harsh conditions such as heavy dust, damp and muddy conditions. Bend Pulley is mainly under the belt movement. If the conveying direction of the belt is left, Tail Pulley is on the right side of the belt conveyor. The main structure is the bearing and the steel Pulley . The driving pulley is the driver of the belt conveyor. The relationship between the two pulleys is like the two wheels of a bicycle. The rear wheel is the driving pulley and the front wheel is Bend Pulley. Bend Pulley and the driving pulley are structurally indistinguishable. Both are composed of the main shaft pulley bearing and the bearing housing. There are two types: main drive and driven.

详细介绍 +

Snub Pulley

Snub Pulley has the characteristics of compact structure, light weight, low occupation, reliable performance, beautiful appearance, convenient use, and can still work normally under harsh conditions such as heavy dust, damp and muddy conditions. Bend Pulley is mainly under the belt movement. If the conveying direction of the belt is left, Bend Pulley is on the right side of the belt conveyor. The main structure is the bearing and the steel Pulley . The driving pulley is the driver of the belt conveyor. The relationship between the two pulleys is like the two wheels of a bicycle. The rear wheel is the driving pulley and the front wheel is Bend Pulley. Bend Pulley and the driving pulley are structurally indistinguishable. Both are composed of the main shaft pulley bearing and the bearing housing. There are two types: main drive and driven.

详细介绍 +





SINCE 1994'

Founded in Hebei, China in 1994, Juxin has grown over the years from a specialist conveyors company to a broad based conveyor engineering company providing materials handling solutions and mechanical installation services to a wide variety of industries and applications.